XBOX SERIES ESD BOOSTER IC HDMIDP1_5F6 U21 BRAND NEW PRE BALLED FOR X, S AND ONE X
£20.00
CURRENTLY UNAVALIBLE
XBOX SERIES ESD BOOSTER **ORIGINAL BRAND NEW (NOT PULLED) – DATE CODES CONSISTENT**
XBOX SERIES ESD IC X / S and One X HDMIDP1_5F6 ESD booster IC brand new sealed in factory tape and pre-balled.
If your Xbox Series X suffering from one or more of the following failure conditions:
1: Power on to a Black screen (no signal on TV)
2: Low resolution mode (640×480)
3: “Re-timer / Re-driver” and HDMI port replaced and still getting one of the above issues
4: Incorrect diode reading on pins 18 & 19 of the HDMI port (OL or alot higher than 0.7xx)
This IC is only to be used in the following consoles:
1: Xbox Series X
2: Xbox Series S
3: Xbox One X
The diagnosis and installation of this IC is for experienced technicians with the correct tools ONLY!
Returns ONLY accepted if the IC is returned unused and still sealed in the black ‘pick & place’ tape – as you received it.
Please see below for specs and more scary warnings:
Out of stock
Proud to be the first retailer worldwide to offer original, new and pre balled XBOX SERIES ESD BOOSTER IC’s
There really isn’t much to say about this XBOX SERIES ESD BOOSTER IC, other than without it the console is a paper weight!
If you do not feel confident with replacing this 3x3mm glass BGA IC, we do offer a mail-in / local drop-off installation service. Please contact us HERE for more information.
We also offer two budget-friendly alternatives to the XBOX ESD BOOSTER IC, that is an easier 13-wire install, which restores full functionality just like this original IC and an easier* to install flex cable. See the links below for info and purchasing.
The WARNING STUFF!!
This is aimed at the experienced / professional repair community.
Quality tools, experience with removing IC’s and micro soldering is not a recommendation – it is essential!
Not to mention the diagnostic skills to rule out the following before hand:
- HDMI port
- HDMI Re-Driver IC
- HDMI TVS diodes
- HDMI ESD IC
- 80 Pin connector and SoC board
- Anything else…
| Weight | 0.02 kg |
|---|---|
| Dimensions | 25 × 10 × 1 cm |
1 review for XBOX SERIES ESD BOOSTER IC HDMIDP1_5F6 U21 BRAND NEW PRE BALLED FOR X, S AND ONE X
Add a review
Related products
Xbox Console Spare Parts
XBOX SERIES X USB & Bind Sync Front Panel Connector (M1105938-001)
Xbox Console Spare Parts
Xbox Console Spare Parts
XBOX Series X NEXUS POWER / EJECT BUTTON FRONT PANEL CONNECTOR
Xbox Console Spare Parts
Xbox Console Spare Parts
Xbox Console Spare Parts
Xbox Console Spare Parts
XBOX SERIES X USB / SYNC RIBBON Compatible Cable M1094651-009
Wayne Dixon (verified owner) –
I bought one of these because I was having resolution issues after changing an encoder. Given that these are an absolute nightmare to try and find I was pleased to have an option to grab an ESD!
Dropped this brand new and sealed little puppy onto my board, gave it some hot air and flux and she sat down beautifully! Fired up the machine into glorious 4K resolution once again!
Thank god!
Cheers Ubers, diamonds!